Clareblend MINI Microcurrent Facial System

Clareblend Mini Microcurrent: The Insider's Secret to Greatly Increasing Your Facial Shape and Firmness 

The Clareblend Mini Microcurrent Device is a small, portable microcurrent device for facial toning and anti-aging. It is the most advanced microcurrent machine we've found for facial toning and firmer skin. With its professional results, the Mini makes powerful microcurrent technology available for home use.

How Does it Work?

The Clareblend Microcurrent Mini uses a patented process to deliver this ultra gentle electrical current to your skin through two electrodes that are applied directly to your face. This ultra low current stimulates muscles beneath your skin's surface, causing them to subtly contract, effectively increasing in tone yet remain below your awareness . No sparking or strong jolts from contracting and relaxing. This same current causing the muscle toning also stimulate the production of new collagen fibers in the dermis layer of your skin, which leads to firmer, more youthful-looking skin over time.

Clareblend's patented process also helps stimulate blood flow beneath your skin's surface by increasing capillary dilation (the widening of blood vessels). This increased blood flow brings oxygen and nutrients into deeper layers of your dermis where they can help produce new collagen fibers as well as increase cellular turnover rate (the rate at which old cells are replaced with new ones). Increased cellular turnover results in smoother, more even-toned skin with fewer wrinkles and less sagging over time.

The more you use it, the firmer your facial muscles become. The benefits of using the Clareblend Mini accumulate, with your facial muscles remembering the increased muscle tone you've stimulated,which helps in regaining your higher, firmer, and more youthful facial shape.

Designed for long-term improvement, this convenient and portable microcurrent skincare device rebuilds the memory of your facial muscles, strengthening and defining them, increasing circulation, skin protein regeneration, cell turnover, skin repair, and growth.

With regular and continued use, just 3x weekly for 30 minutes or more, you will see a higher, tighter, trimmer look of a more youthful face.

A Quick Boost!

A 12-Day Challenge will strongly lift and impress, restoring your firmer jawline and the V-Line lower facial contour, the signature youth.;

Small, hand-held device based on professional microcurrent systems providing quality and effectiveness. Recommended for clients in between professional treatments, not as a substitute.

Product Features

• No battery to replace
• Plugs into USB ports
• Proven pre-determined settings provide great results without the guesswork
• Gold connector for reliable power

Items included with Clareblend MINI Facial System

• 1 - MINI travel bag 1 - MINI device
• 1 - 2 oz conductive gel
• 1 - manual
• 6 Month Limited Warranty Instructions Included

Click here to learn more about the Science of Microcurrent

Clareblend MINI Product Demonstration

How to Use

Movement 1

Cleanse the entire face and neck area.  Apply a thin layer of conductive gel to one side of the neck and jawline.  Touch MINI electrodes to the skin at the base of the neck and wait for a single beep.  Slowly glide upward toward the jawline.  Maintain electrode contact with the skin while lifting and holding at the end of the movement until a double beep is heard.  Move to the next section and continue movements, as shown, 3 times each.  NOTE: Avoid thyroid and the center area of the neck as indicated as a rectangle on the diagram

Movement 2

Position MINI near the center of the neck and touch the electrodes to the skin.  Wait for a single beep, then move the device slowly toward the side of the neck.  Lift and hold until a double beep is heard.  Continue movements as shown, working each section 3 times on the neck area.  NOTE: Avoid thyroid and the center area of the neck as indicated as a rectangle on the diagram

Movement 3

Apply a thin layer of conductive gel to the jawline, cheek, and temple area.  Position MINI at the jawline and touch both electrodes to the skin.  Slowly glide the MINI up and under the cheekbone.  Lift and hold until a double tone is heard.  Move to the next section as shown by the arrows in the diagram and repeat process.  Continue movements as shown, working each section 3 times

Movement 4

Touch electrodes to the skin near the jawline and slowly glide across the skin toward the side of the face.  Bottom movement follows the jawline with one electrode above and one electrode below the jawline.  Maintain contact with the skin to lift and hold at the end of the movement until a double beep is heard.  Move to the next section as shown by the diagram and repeat until each movement has been completed 3 times.  It is okay to overlap movements

Movement 5

Gently apply a thin layer of conductive gel around the eye, temple, and brow area.  Touch electrodes to the skin near the nose.  After a single beep is heard, move MINI toward the ear and continue movement gliding upward treating crows feet area.  Hold and lift at the end of the movement until a double beep is heard.  Repeat 2 more times.  Use lighter pressure under the eye

Movement 6

Touch electrodes to the skin at the base of the brow bone.  Wait for a single beep, then lift at the brow and hold until a double beep is heard.  Repeat 3 times in each section as arrows shown on the diagram.  All eye movements should be on the orbital bone, never on the eyelid

Movement 7

Apply a thin layer of conductive gel to one side of the forehead.  Touch electrodes to the skin between the brows and wait for a single beep.  Begin movement between the crows, moving up and over brow toward the side of the forehead.  At the end of the movement, hold the electrodes in place against the skin while lifting until a double beep is heard.  Movements for each section should be completed 3 times

Movement 8

Touch electrodes to the skin at the top of the brow and wait for a single beep.  Begin movement at the top of the brow and glide up toward the hairline.  Lift and hold at the end of the movement until a double beep is heard.  Complete each movement 3 times.  After completing movements on one side of the face, move to the next side by applying a thin layer of conductive gel then begin movements 1-8.  When finished with all the movements on both sides of the face, apply sun protectant, unplug MINI from power source, clean electrodes with a damp cloth and store MINI in its travel bag

About Clareblend, Inc

Clareblend Microcurrent Systems are manufactured in Reno, Nevada. The Jeunesse and MINI microcurrent systems are manufactured to the highest industry standards. To maintain strict guidelines and high-quality control, the equipment is designed and manufactured on-site according to Class I and II ISO & FDA standards. Clareblend, Inc is committed to providing the Esthetic, Medical, and Electrology professions with technologically advanced equipment and designs.

Warnings and Precautions

The MINI facial procedure is intended for facial stimulation and should not be used if the following indications are present:

• Pregnancy
• Seizures
• Cancer or tumors
• Cardiac pacemaker, or any electronic implanted defibrillator, simulators, or electronic devices as possible interference with these devices may occur
• Do not use if prone to phlebitis, thrombosis, or on varicose veins

Use MINI only on normal skin. Do not use on skin that is swollen, infected, or has cancerous lesions.

MINI is designed for cosmetic use only and for individuals in good health. As with any medical condition or after facial surgery of any kind, please consult your physician before use.

MINI is for adult use only and should be kept out of the reach of children.

Wait a minimum of 10 days before using MINI after the following procedures:

• Injections (Injectables)
• Fillers
• Micro-needling (use after the skin has fully healed)

Warranty

Device has a 6-month limited warranty. Activate warranty by submitting information online at: https://www.clareblendmini.com/warranty-submission

Warranty is void when device:

• Is transferred to another person
• Has been misused or subjected to accident
• Has improper maintenance or repair
• Has undergone an unauthorized modification